Floating point division by zero error

Discussion about Avi2Dvd.
Requests and bug fixing.

Moderators: george, Excalibur!, skyheartblue, roger_rabbit, reburn

Floating point division by zero error

Postby How » Thu Dec 29, 2005 11:20 am

I have installed AVI2DVD 0.4.3 beta on my laptop - Acer Aspire sempron 3000+, 768mb ddr, 40gb hdd, Fat 32, windows home. When I try to load an avi file it gives a floating point division error. Any help would be greatly appreciated. AVI2DVD works great on my desktop - 1.8ghz, 768mb ddr, 250gb hdd, ntfs, windows professional. Any ideas?
How
Junior Member
 
Posts: 2
Joined: Thu Dec 29, 2005 11:07 am

Postby How » Mon Jan 02, 2006 10:24 am

I have found out what the problem was! I converted the hard drive on my laptop from FAT32 to NTFS and AVI2DVD now works perfectly.
How
Junior Member
 
Posts: 2
Joined: Thu Dec 29, 2005 11:07 am

Up!

Postby Aargh » Sun Jan 08, 2006 11:21 pm

Hi everybody!
I have the same problem with AVI2DVD. I can't convert an Xvid to DVD, because "floating..."
My laptop is a Pentium 530 3.0G, with 1G DDR, 200+160Go HDD, full NTFS, Windows XP SP2.
Can you help me?
Thanks to according me your time^^

My current version is 0.4.3 beta
Aargh
Junior Member
 
Posts: 2
Joined: Sun Jan 08, 2006 11:14 pm

Postby trustfm » Mon Jan 09, 2006 1:16 pm

Infact you need an FAT32->NTFS Convertion you can do it without any format mantaining all of your data take a look how here :
http://www.ntfs.com/quest3.htm
trustfm
Site Admin
 
Posts: 1649
Joined: Sun Feb 27, 2005 4:40 pm

Postby Aargh » Mon Jan 09, 2006 3:23 pm

But I'm in ntfs yet
But i wanna try with saving my data.
EDIT : the command line doesn't work properly. I'll try with boot
Thanks for the quick answer by the way :]

Still the same...
Perhaps the .avi movie isn't correct.
No problem
Thanks a lot^^
Aargh
Junior Member
 
Posts: 2
Joined: Sun Jan 08, 2006 11:14 pm

Solution to error

Postby Shrike » Sun Jan 15, 2006 9:08 pm

Hi,

The solution is quite simple.

Install Xvid. I had the same problem and after installing Xvid everything works.
So you need codecs to run this program :-)

Trustfm, you better change the error to CODEC MISSING :-)
Shrike
Junior Member
 
Posts: 1
Joined: Sun Jan 15, 2006 9:06 pm

Postby stsong » Fri Feb 17, 2006 3:57 am

Thanks Shrike,
Installing Xvid solved the problem. here's the download http://www.xvidmovies.com/codec/
stsong
Junior Member
 
Posts: 2
Joined: Fri Feb 17, 2006 3:51 am

?

Postby baka » Fri Mar 10, 2006 6:22 pm

I get "floating point division by zero" even after i checked to see if i was using NTFS and installed xvid. It only does this for my MKV and OGM files. it doesn't seem to react to avi.
baka
Junior Member
 
Posts: 1
Joined: Fri Mar 10, 2006 6:20 pm

Postby Goosfraba » Thu Mar 16, 2006 12:13 am

stsong wrote:Thanks Shrike,
Installing Xvid solved the problem. here's the download http://www.xvidmovies.com/codec/


Damn, I just downloaded Xvid but nothing changes. Where do I look to see if I'm using NTFS or not? I don't even know what that is :shock:
Goosfraba
Junior Member
 
Posts: 1
Joined: Wed Mar 15, 2006 11:50 pm

Same Problem - install XVID worked

Postby SoulDoubt » Tue May 16, 2006 8:53 pm

I had the same problem with "floating point division by zero".
I downloaded & installed XVID from above link and now I no longer get this error.
I am using NTFS file system in windows xp.
SoulDoubt
Junior Member
 
Posts: 1
Joined: Tue May 16, 2006 8:49 pm

Next

Return to Avi2Dvd

Who is online

Users browsing this forum: No registered users and 2 guests

cron